Resources

We take pride in not only providing top-notch services, but also in staying in the know by participating in current trends and information within our local area and industry.

Blue drip paintbrush

What’s the Best Exterior Paint for Florida Commercial Buildings?

Nov 20, 2026

The best exterior paint for a Florida commercial building is not a single brand or can. It is a complete coating system (cleaning, any primer or conditioner, sealants and topcoats applied at the specified film thickness) that the manufacturer specifies for that substrate and that building’s exposure, applied the way the specification says. The right coating system, applied the right way, is what protects the building through Florida sun, humidity, salt air and wind-driven rain.

Boards, community association managers and property managers ask us some version of “what’s the best paint?” on almost every property walk. The useful answer is about the whole system on the wall, not the label on the bucket. Here is how we explain it to the owners and associations we work with across Tampa Bay and Central Florida.

Why “best paint” is really “best system”

An exterior coating only performs as well as everything underneath it. A premium topcoat over a dirty wall, failed caulking or an incompatible old coating will not protect the building the way it was designed to. A manufacturer’s specification ties the pieces together: how the surface is cleaned and prepared, which primer or conditioner goes on which surface, which sealants are used at joints and openings, how many finish coats go on, and how thick each coat needs to be.

That specification is also what the manufacturer’s warranty is built around. If steps are skipped or the coating is applied thinner than required, the building may not get the protection or the warranty the board thought it was paying for.

What Florida weather asks of an exterior coating

Florida buildings face a combination of conditions that a coating system has to be chosen for:

  • Intense sun. Year-round UV exposure breaks down coatings over time and is a big part of why color fades and finishes chalk.
  • Heat and humidity. Surfaces expand and contract daily, and moisture affects when coatings can go on and how they cure.
  • Salt air. Waterfront and near-coast properties put extra demands on metal railings, doors and architectural metal as well as walls.
  • Wind-driven rain. Storm season pushes water at cracks, joints and openings, which is why sealants and crack repair matter as much as the topcoat.

Different elevations of the same building can see these conditions very differently. A waterfront exposure and a sheltered courtyard may not call for the same approach.

Dolphin Watch townhomes after exterior repaint, Tierra Verde FL
Dolphin Watch in Tierra Verde after its exterior repaint. Coastal stucco buildings like these face sun, salt air and wind-driven rain every year.

The parts of an exterior coating system

Whatever product line is specified, a complete exterior system on a commercial building usually includes these steps:

  • Cleaning. Coatings need a clean surface to bond. We clean with a soft pressure wash and an environmentally friendly cleaning solution, never bleach.
  • Cosmetic repair. Hairline and surface cracks in stucco and EIFS, and damaged wood trim, are repaired so the new coating has a sound surface to go on. This is cosmetic, nonstructural work.
  • Sealants. Failed caulking around windows, doors and joints is removed and replaced. These are the places a coating can’t keep water out on its own.
  • Primer or conditioner. Some surfaces and some existing coatings need one before the finish coats. Stucco, fiber-cement siding, wood trim and metal often call for different products.
  • Topcoats at the specified film thickness. The number of coats and the thickness of each are set by the manufacturer’s data sheet, and the coverage rate has to match.

Match the system to each substrate

Most commercial buildings have more than one surface, and one product rarely fits all of them. Walls, trim, doors, railings and stair systems are usually handled with different products inside the same specification.

At a 314-unit apartment community in Clearwater, managed by Greystar, the breezeways included fiber-cement siding, wood trim, metal doors and stair systems. Each surface needed its own primer and finish under the Sherwin-Williams specification, and each was coated to that specified system.

Stair railings and stringers prepped for coating in an apartment breezeway, Clearwater FL
Stair railings and stringers prepped for coating at a 314-unit apartment community in Clearwater. Metal, siding and trim each get the primer and finish their specification calls for.

Stucco is its own decision. For some stucco buildings an elastomeric coating is a good fit, and for others a high-quality standard acrylic system is the better choice. Our post on elastomeric coatings for Florida stucco buildings covers when each makes sense.

Check what’s already on the wall

The new system has to bond to what is already there. If the existing coating is failing or isn’t compatible, the best topcoat in the world won’t hold. That is why we look closely at the existing coating and, when there is a question, test adhesion and bring the manufacturer in before the full project goes forward.

“As the property owner and manager, we appreciated Bayshore Painters’ consistent communication and attention to detail throughout the project. When they identified a failing existing coating, they proactively brought it to our attention, conducted adhesion testing, and coordinated with Sherwin-Williams to determine the appropriate corrective solution rather than simply painting over the issue. Their team also conducted thorough walkthroughs of each building and addressed touch-ups before considering the work complete. Bayshore Painters demonstrated a commitment to quality, accountability, and protecting our investment. We would confidently recommend them to other multifamily property owners.”

Bryan Grackin, Senior Director, Construction Services, Greystar

Which brand is best?

We work with manufacturers including Sherwin-Williams, Pittsburgh Paints, Benjamin Moore and others. Each offers a range of exterior coating systems. The choice of manufacturer matters less than choosing the right system from that manufacturer for the building, getting the specification in writing, and applying it exactly as written.

When you compare proposals, make sure they price the same system. Two bids can list the same scope and specify very different coatings. Our post on scope of work vs. specifications explains how to tell.

Ask your contractor: Which manufacturer system is specified for each surface on our building, and who wrote the specification? What film thickness does each coat require, and how will it be checked? What does the warranty cover, and what would void it? How will you confirm the new system will bond to our existing coating?

A quick checklist for boards and managers

  • A written manufacturer specification for every surface: walls, trim, doors, railings and stairs.
  • Cleaning, cosmetic repair and sealant replacement included in the scope.
  • Primer or conditioner called out where the specification requires it.
  • Number of coats and film thickness stated, not just “two coats.”
  • A plan for checking the existing coating before the full building is coated.
  • Warranty terms in writing from the manufacturer and the contractor.

The coating system you choose also shapes when the next repaint lands. Our guide on how often a Florida condo should be repainted covers the signs a coating has stopped protecting the building. You can see the condo, apartment, retail, hospitality and office buildings we have repainted on our projects page, and the full list of what we do on our services page.

Frequently asked questions

What is the best exterior paint for Florida commercial buildings?

The best exterior paint is a complete coating system that the manufacturer specifies for the building’s substrates and exposure: cleaning, any primer or conditioner, sealants and topcoats at the specified film thickness, applied as the specification requires. The system and how it is applied matter more than the brand name.

Does one exterior paint work for every surface on a building?

Usually not. Stucco, fiber-cement siding, wood trim, metal doors and railings often need different primers and finishes within the same specification. A good specification calls out the right products for each surface.

Which paint brand is best for Florida buildings?

Major manufacturers, including Sherwin-Williams, Pittsburgh Paints and Benjamin Moore, offer exterior coating systems. Choosing the right system for your building, getting the specification in writing and applying it correctly matter more than the brand.

Planning an exterior repaint in Tampa Bay?

Request a property assessment and we will walk the building with you, look at each surface and the existing coatings, and help your board or ownership choose the right system for the property. We work with condo and HOA associations, apartment communities and commercial properties across Tampa Bay and Central Florida, and you can see the property types we serve on our industries page.